Reorder getting started documentation

docs/mkdocs.yml

@@ -40,11 +40,11 @@ exclude_docs: |
 nav:
   - Getting started:
       - index.md
-      - Configure: getting-started/configure.md
-      - Deploy Machine: getting-started/machines.md
       - Installer: getting-started/installer.md
-      - Setup Networking: getting-started/networking.md
-      - Provision Secrets & Passwords: getting-started/secrets.md
+      - Configure: getting-started/configure.md
+      - Secrets & Facts: getting-started/secrets.md
+      - Deploy Machine: getting-started/machines.md
+      - Mesh VPN: getting-started/networking.md
       - Backup & Restore: getting-started/backups.md
       - Flake-parts: getting-started/flake-parts.md
   - Templates: templates/index.md

docs/site/getting-started/configure.md

@@ -84,7 +84,7 @@ Adding or configuring a new machine requires two simple steps:
 
     === "**buildClan**"
 
-        ```nix title="clan-core.lib.buildClan" hl_lines="17 13"
+        ```nix title="clan-core.lib.buildClan" hl_lines="17"
         buildClan {
           # ...
           machines = {
@@ -97,8 +97,8 @@ Adding or configuring a new machine requires two simple steps:
 
               # Change this to the correct ip-address or hostname
               # The hostname is the machine name by default
-              clan.networking.targetHost = pkgs.lib.mkDefault "root@<hostname>"
-              
+              clan.networking.targetHost = pkgs.lib.mkDefault "root@jon"
+
               # Change this to the ID-LINK of the desired disk shown by 'lsblk'
               disko.devices.disk.main = {
                 device = "/dev/disk/by-id/__CHANGE_ME__";
@@ -106,15 +106,13 @@ Adding or configuring a new machine requires two simple steps:
 
               # ...
             };
-          };     
+          };
         }
         ```
 
     === "**flakeParts**"
 
-
-
-        ```nix title="clan-core.flakeModules.default" hl_lines="17,13"
+        ```nix title="clan-core.flakeModules.default" hl_lines="17"
         clan = {
           # ...
           machines = {
@@ -127,8 +125,8 @@ Adding or configuring a new machine requires two simple steps:
 
               # Change this to the correct ip-address or hostname
               # The hostname is the machine name by default
-              clan.networking.targetHost = pkgs.lib.mkDefault "root@<hostname>"
-              
+              clan.networking.targetHost = pkgs.lib.mkDefault "root@jon"
+
               # Change this to the ID-LINK of the desired disk shown by 'lsblk'
               disko.devices.disk.main = {
                 device = "/dev/disk/by-id/__CHANGE_ME__";
@@ -136,14 +134,14 @@ Adding or configuring a new machine requires two simple steps:
 
               # ...
             };
-          };     
+          };
         };
         ```
 
-### Step 2. Detect hardware specific drivers
 
-!!! Tip
-    If you need to connect the `nixos-image` installer to the wifi, look [here](https://docs.clan.lol/getting-started/installer/#optional-connect-to-wifi).
+!!! Info "In this case `__CHANGE_ME__` should be `nvme-eui.e8238fa6bf530001001b448b4aec2929`"
+
+### Step 2. Detect hardware specific drivers
 
 1. Generate a `hardware-configuration.nix` for your target computer
 
@@ -151,18 +149,11 @@ Adding or configuring a new machine requires two simple steps:
     ssh root@flash-installer.local nixos-generate-config --no-filesystems --show-hardware-config > machines/jon/hardware-configuration.nix
     ```
 
-### Initialize the facts
-
-!!! Info
-    **All facts are automatically initialized.**
-
-If you need additional help see our [facts chapter](./secrets.md)
 
 ---
 
 ## Whats next?
 
-- [Deploying](machines.md): Deploying a Machine configuration
-- [Secrets](secrets.md): Learn about secrets and facts
+- [Secrets & Facts](secrets.md): Setting up secrets with nix-sops
 
 ---

docs/site/getting-started/installer.md

@@ -1,10 +1,11 @@
 # Installer
 
-We offer a dedicated installer to assist remote installations.
+Our installer image simplifies the process of performing remote installations.
 
-In this tutorial we will guide you through building and flashing it to a bootable USB drive.
+Follow our step-by-step guide to create and transfer this image onto a bootable USB drive.
 
-## Creating and Using the **Clan Installer**
+!!! info 
+    If you already have a NixOS machine you can ssh into (in the cloud for example) you can skip this chapter and go directly to [Configure Machines](configure.md).
 
 ### Step 0. Prerequisites
 
@@ -21,7 +22,7 @@ In this tutorial we will guide you through building and flashing it to a bootabl
     lsblk
     ```
 
-    ```{.console, .no-copy}
+    ```shellSession hl_lines="2"
     NAME                                          MAJ:MIN RM   SIZE RO TYPE  MOUNTPOINTS
     sdb                                             8:0    1 117,2G  0 disk
     └─sdb1                                          8:1    1 117,2G  0 part  /run/media/qubasa/INTENSO
@@ -89,17 +90,6 @@ Select `NixOS` to boot into the clan installer.
 
 For deploying your configuration the machine needs to be connected via LAN (recommended).
 
-For connecting via Wifi, please consult the [guide below](#optional-connect-to-wifi).
-
----
-
-## Whats next?
-
-- [Configure Machines](configure.md): Customize machine configuration
-- [Deploying](machines.md): Deploying a Machine configuration
-- [WiFi](#optional-connect-to-wifi): Guide for connecting to Wifi.
-
----
 
 ## (Optional) Connect to Wifi
 
@@ -147,3 +137,11 @@ Press `ctrl-d` to exit `IWD`.
     Press `ctrl-d` **again** to update the displayed QR code and connection information.
 
 You're all set up
+
+---
+
+## Whats next?
+
+- [Configure Machines](configure.md): Customize machine configuration
+
+---

docs/site/getting-started/machines.md

@@ -35,28 +35,11 @@ This process involves preparing a suitable hardware and disk partitioning config
 
         - Any cloud machine if it is reachable via SSH and supports `kexec`.
 
-Confirm the machine is reachable via SSH from your setup computer.
-
-```bash
-ssh root@<your_target_machine_ip>
-```
 
 ### Step 1. Deploy the machine
 
 **Finally deployment time!** Use the following command to build and deploy the image via SSH onto your machine.
 
-=== "**SSH access**"
-
-
-
-    Replace `<target_host>` with the **target computers' ip address**:
-
-    ```bash
-    clan machines install my-machine <target_host>
-    ```
-
-    !!!note 
-        Building and deploying time will depend on hardware and connection speed.
 
 === "**Image Installer**"
 
@@ -121,35 +104,50 @@ ssh root@<your_target_machine_ip>
         4.  :man_raising_hand: I'm a code annotation! I can contain `code`, __formatted
             text__, images, ... basically anything that can be written in Markdown.
 
-    
     !!!tip
-        We recommend using KDE Connect for sharing the deployment information from the QR code with the deploying machine.
+        For easy sharing of deployment information via QR code, we highly recommend using [KDE Connect](https://apps.kde.org/de/kdeconnect/).
 
-    
-    The QR code can be used to deploy either with an image, that is decoded on the fly, or it's contained json information.
+    There are two ways to deploy your machine:
 
-    With the path to a `json` string, or the string itself:
-    ```terminal
-    clan machines install [MACHINE] --json [JSON]
-    ```
-    With the path to an image containing the relevant QR code:
-    ```terminal
-    clan machines install [MACHINE] --png [PATH]
+    1. **SSH with Password Authentication**
+        Run the following command to install using SSH:
+        ```bash
+        clan machines install [MACHINE] flash-installer.local
+        ```
+
+    2. **Scanning a QR Code for Installation Details**
+        You can input the information by following one of these methods:
+          - **Using a JSON String or File Path:**
+              Provide the path to a JSON string or input the string directly:
+              ```terminal
+              clan machines install [MACHINE] --json [JSON]
+              ```
+          - **Using an Image Containing the QR Code:**
+              Provide the path to an image file containing the relevant QR code:
+              ```terminal
+              clan machines install [MACHINE] --png [PATH]
+           ```
+
+    !!!note
+        If you are using our template `[MACHINE]` would be `jon`
+
+=== "**SSH access**"
+
+    Replace `<target_host>` with the **target computers' ip address**:
+
+    ```bash
+    clan machines install [MACHINE] <target_host>
     ```
 
+    !!!note 
+        Building and deploying time will depend on hardware and connection speed.
+
 
 !!! success
 
     Your machine is all set up. 🎉 🚀
 
----
 
-## What's next ?
-
-- [**Update a Machine**](#update-your-machines): Learn how to update an existing machine?
-- [**Configure a Private Network**](./networking.md): Configuring a secure mesh network.
-
----
 
 ## Update Your Machines
 
@@ -204,6 +202,12 @@ This is useful for machines that are not always online or are not part of the re
 
 ---
 
+## What's next ?
+
+- [**Mesh VPN**](./networking.md): Configuring a secure mesh network.
+
+---
+
 # TODO:
 * TODO: How to join others people zerotier
   * `services.zerotier.joinNetworks = [ "network-id" ]`

docs/site/getting-started/networking.md

@@ -1,4 +1,4 @@
-# Overlay Networks
+# Mesh VPN
 
 This guide provides detailed instructions for configuring
 [ZeroTier VPN](https://zerotier.com) within Clan. Follow the

docs/site/getting-started/secrets.md

@@ -6,7 +6,6 @@ Clan utilizes the [sops](https://github.com/getsops/sops) format and integrates
 
 This documentation will guide you through managing secrets with the Clan CLI
 
-## Initializing Secrets (Quickstart)
 
 ### Create Your Master Keypair
 
@@ -52,17 +51,17 @@ sops/
     └── <your_username>/
         └── key.json
 ```
+If you followed the quickstart tutorial all necessary secrets are initialized at this point.
 
 ---
 
-> If you followed the quickstart tutorial all necessary secrets are initialized at this point.
+## Whats next?
 
-- Continue with [deploying machines](./machines.md)
-- Learn about the [basics concept](#concept) of clan secrets
+- [Deployment](machines.md): How to remotely deploy your machine
 
 ---
 
-## Concept
+## Indepth Explanation
 
 The secrets system conceptually knows two different entities:
 
@@ -325,3 +324,11 @@ Each member of the group `admins` in this case will be able to decrypt the secre
 
 Since our clan secret module will auto-import secrets that are encrypted for a particular nixos machine,
 you can now remove `sops.secrets.<secrets> = { };` unless you need to specify more options for the secret like owner/group of the secret file.
+
+---
+
+## Whats next?
+
+- [Deployment](machines.md): How to remotely deploy your machine
+
+---

docs/site/index.md

@@ -110,12 +110,6 @@ sara
 
 ### What's Next?
 
-- [**Machine Configuration**](getting-started/configure.md): Declare behavior and configuration of machines.
-
-- [**Deploy Machines**](getting-started/machines.md): Learn how to deploy to any remote machine.
-
 - [**Installer**](getting-started/installer.md): Setting up new computers remotely is easy with an USB stick.
 
-- [**Check out our Templates**](templates/index.md)
-
 ---